Falls from heights is the biggest killer on construction sites in NSW, with most falls occurring from four metres or less.

Falling from any height can lead to death or long-term injuries.

Falls from heights are a major cause of fatalities and serious injuries at work in New South Wales.

Most people who are seriously injured or killed, fall from a height of four metres or less.

Ladders, incomplete scaffolds, falling off a truck, a roof edge or falling through fragile roof sheeting are the major causes of injuries.

More than 12,000 workers were injured after falling from a height between 2014 and 2017. 25 died and more than 240 were permanently disabled.

These incidents largely happen in the construction, manufacturing, transport, postal and warehousing and agriculture industries.

Hazards and risk controls

Eliminate the problem if it is reasonably practicable to do so. Here are some safety tips.

Firstly, talk to everyone in your workplace. Listen to their views about working at heights. Draw on everyone’s experience and ideas.

1. 1. Work on the ground or on a solid construction.
   If you don’t have to work at heights, don't. Working from the ground is always the safest option.
   Designers should be looking for alternatives to working at heights during the design-phase of the project.
2. Use a fall-prevention device.
   If you have to work from a height, you need to manage the risk of a fall. A fall-prevention device is best because it will prevent your workers from falling. Examples include temporary work platforms, guardrails and scaffolding. All help to keep you safer when working at heights.
3. Use a work-positioning or fall-arrest system.
   When it's not possible to use a fall-prevention device, a work-positioning system or a fall-arrest system are your next best options.

A work-positioning system enables a person to work supported in a harness in tension in a way that prevents the person from falling eg industrial rope access. A fall-arrest system stops a person who has fallen and reduces the impact of the fall eg industrial safety nets or fall arrest harnesses used with lifelines or individual anchors.

If you use a work-positioning or fall arrest system, have emergency and rescue procedures in place.

SafeWork NSW technical help

Codes of practice

For practical information about working on the ground or from a solid construction, fall prevention devices, work positioning systems, fall arrest systems, ladders, administrative controls, emergency procedures, and the design of plant and structures, see the Code of practice for managing the risk of falls at workplaces.

For specific guidance for housing construction, see the Code of practice for preventing falls in housing construction.

Legal obligations

There are specific laws about working safely at heights: See clauses 78 – 80 of the Work Health and Safety Regulation 2017.

There are also general work health and safety laws that will apply to you in any situation, including when working at heights.

FIA KNOWLEDGE CHANNEL